Category Archives: LoRa

The Things Indoor Gateway (TTIG)

Posted on by
3

The Things Indoor Gateway (TTIG) has been announced and distributed during the TheThings conference 2019. Since it was impossible to get some, victim of its success (and the little initial stock). From mid-august it is now possible to get some and I’ve bought one as soon as possible.

The Things Indoor Gateway is a low cost (70€ – 90€), 8 channels (EU868 full gateway), LoRaWan gateway running on TheThingsNetwork. You can’t expect a large coverage with a such solution to be used for city wide network but it will be perfect for covering a large house or a small building where you want to deploy LoRaWan sensors.

Continue reading →

LoRaWan in US915 zone

Posted on by
7

I’m living in RCZ1 (EU868) area and our zone have some specific rules for using the free radio frequencies like duty-cycle to comply regulation I already shared in the linked post. I was little experienced with the US zone regulations. Thanks to a project made for a North American customer I started working on it and I’ve surprised of the differences and how it impacts the LoRaWan developments.

Continue reading →

First steps with LoRa Radio Node (Arduino)

Posted on by
36

The LoRa Radio Node is an AVR Arduino board with a RFM95 LoRa module. This all-in-one LoRa module allows to have a LoRaWan device for a reasonable price around 15€. You need to add a battery (like a LS14500 3,7V battery) on the battery holder for a 4€ extra cost to make it mobile. LiPo option are also available using the power connector. Even if the connectors are looking like grove, they are not compatible so you will have to make your own wiring to connect extensions.

This post is reviewing how to getting started with this board to fire your first LoRaWan frame over The Things Network.

Continue reading →

Alarm your TheThingsNetwork gateway

Posted on by
4

There is actually no solution to get an alarm when a TTN gateway is shutting down. That said, all the information are accessible thanks to the different API. 

To monitor my deployed gateways, I’ve made a little script in python working with IFTTT. It connects to the The Things Network api, get the gateway status and call the IFTTT webhook in case of last gateway update too old. 

On IFTTT i’ve created an applet to generate a Push notification on phone to get the alarm.

The script is accessible in the post detail.

Continue reading →

Make a Laird Sentrius an outdoor gateway

Posted on by
3

The Laird Sentrius LoRaWan gateway is a low cost, stable and easy to configure on The Things Network gateway. They are indoor gateway. I want to install it outdoor to offer a better coverage.

In certain situation the easiest way to install it outdoor is to use an external antenna and a long antenna cable. In some other situation this approach is complex to implement and the easiest way is to install the gateway outdoor with its antenna and network connection.

The best is to use an outdoor LoRaWan gateway. The price is usually > 600€. Even if in general the outdoor gateways includes GPS and Cellphone connectivity. In this post I’ll explain how I make one of Laird Sentrius outdoor because it costs less than 250€ for the gateway itself.

Continue reading →

HopeRF RFM95 and arduino a low cost LoRaWan solution

Posted on by
36

The HopeRF RFM95w module proposes to access LoRa at low cost. Its unitary price is around 4€ on shop like aliexpress. A version with a shield is also existing. Its name is Lora1276-C1 from niceRF. These different transceivers are using Semtech SX1276 chip. It makes this kind of chip interesting for regional low cost LoRaWAN design in association with a MCU. Here we are going to use it with an Arduino platform.

Continue reading →

Review Laird Sentrius LoRaWan Gateway

Posted on by
5

After having tested different LoRaWan gateway like Kerlink iFemToCell, TheThingsGateway and Kerlink Wirnet, in the past two years, I was looking for a new low cost indoor gateway for deploying TheThingsNetwork (the global crowd-sourced LoRaWan network) in my city.

Gateway are not all easy to shop, Kerlink at first. As one of my iFemToCell has burned into the hell this summer with no reason after only 3 months powered-on I was not looking for the same. TheThingsGateway has different semiconductor provider reseller but myne suffer of certain instabilities actually and I need to reboot on regular basis. So that’s the reason of this new try.

Let’s see how to setup on TTN.

Continue reading →

Getting started with Arduino MKRWAN1300 & LoRaWan TTN

Posted on by
Reply

After making some post on Arduino MKRFOX1200, here I come with the first steps to use MKRWAN1300 board to send your first frame on TTN and also how to use them for discovering the TTN coverage around.

MKRWAN1300 board is a LoRaWan Arduino board based on the Murata CMWX1ZZABZ module. This module is capable for LoRaWan in Europe (868Mhz), NA (915MHz) Asia (923MHz) …. It is also capable for Sigfox in both zone (but actually not with this board as much as I know). Producing 14dB emission and capable for 20dB emission for FCC zone. The price of the Arduino board is about 40€ and it is largely available on Internet.

In this post we are going to see how to make the first steps with this board and create a device to map the TTN network coverage with and without a GPS.

Continue reading →