SigfoxConnect 2018 Announcement – Passive Sigfox Bubble tags

Posted on by
Reply

As part of the R&D announcement during Sigfox Connect 2018 a passive Sigfox tag has been introduced. I’ve seen the demo made by Christophe Fourtet and the technology is really promising.

Basically a passive tag is a tag with no battery. The one actually seen it really near to be a passive tag. This tag is receiving power from a radio signal and with this power respond with a radio message. In the Sigfox context this radio message is a Sigfox message. What is really strong with this technology is the low level of power to be provided to get it working. I’ve seen it working with less than a watt and a distance larger than 10 meters with not any radio optimization on the prototypes. The radio message, thanks to the Sigfox communication technology can reach a distant basestation getting benefit of the large Sigfox radio range. The use in conjunction of a micro-gateway sounds a good idea. The global solution looks to be a low cost and easy to deploy solution for asset management & tracking.

Continue reading →

SigfoxConnect 2018 Announcement – The bubbles

Posted on by
2

As a coming soon produit, widely available as an open design, Sigfox has introduce during the Sigfox Connect conference the Bubbles: They are basically a Sigfox Beacon.

Working on the technological basis of the Monarch technology the bubble allows a device to identify the zone where it is. This is basically a kind of solution existing on bluetooth, LoRa but Sigfox was not positioned on it. This is now fixed with the Sigfox Bubble technology.

Compared to bluetooth the Sigfox solution is offering a large range of operations: thanks to the long range communication capability, you can imagine to cover a zone like a complete building or a parking as a single cell ; this is for future as the current technical offering is covering 10 meters max. Like on bluetooth you can manage the beacon power to reduce the cell (bubble) size to 1 or 2 meters and get your device position on this range. On top of this with no technology addition, you get access to the Atlas service locating your device on public area with the usual 1km precision.

The main difference with other technologies comes with the service proposal. Bubble is not just a technology ! Following the Sigfox business model, Bubble is a manage service: you have your bubble devices managed by Sigfox, you are able to share positions with business partner across the bubble global network and you get benefits of the public Bubble network operating on different point of interest.

This service is where the disruption starts !

Continue reading →

Getting started with GNURadio & scapy

Posted on by
Reply

GNURadio is an open-source software for making Software Defined Radio. It can be used to model a radio transmission or the process a real radio communication.

Scapy is a python tool set able to interact with GNURadio. Basically GNURadio will receive an signal from a SDR key and process it to get a digital sequence. Scapy will process this sequence and potentially generate a new sequence to be process by GNURadio to be transmitted.

There are plenty of example of GNURadio/Scappy usage to hack, simulate, learn many radio protocols like WiFi, GSM, Bluetooth… I want to play a little with Sigfox also so that’s why I started to investigate on this tool.

As this tool is a bit complicated, this post details the key element having helped me to getting started with this tool.

Continue reading →

Review Laird Sentrius LoRaWan Gateway

Posted on by
5

After having tested different LoRaWan gateway like Kerlink iFemToCell, TheThingsGateway and Kerlink Wirnet, in the past two years, I was looking for a new low cost indoor gateway for deploying TheThingsNetwork (the global crowd-sourced LoRaWan network) in my city.

Gateway are not all easy to shop, Kerlink at first. As one of my iFemToCell has burned into the hell this summer with no reason after only 3 months powered-on I was not looking for the same. TheThingsGateway has different semiconductor provider reseller but myne suffer of certain instabilities actually and I need to reboot on regular basis. So that’s the reason of this new try.

Let’s see how to setup on TTN.

Continue reading →

STM32 and Low Power Mode

Posted on by
12

STM32 ARM MCU are proposing different low power mode for saving energy when running IoT on battery. Some basic example of low power are delivered with the SDK as part of CubeMx solution but these example are not really complete, not well documented and in my point of view difficult to use in a Fresh new project. Basically my current feeling with STM32 is these guy are pretty good to write thesis on how to do magic stuff with the MCU, writing hundreds of pdf pages about really detailed stuff but they are really bad for providing some line of code to illustrate this valuable content with something practicable you can use on the go. So after spending a week working on a working and understood example of low power code, I’ll share with you the result of this work…

Continue reading →

STM32 and Arduino, working with a custom board

Posted on by
Reply

Arduino is supporting STM32 platform and after following the installation steps, you can easily work with the st-microelectronics development kit.

In the real life you need to create a specific setup once your prototype is transformed into a custom board. This setup redefines the pin mapping, the target MCU and needs to refine the firmware transfer method as you will use and external STLINK programmer.

In this post we are going to see the different step for doing this.

Continue reading →

Arduino for STM32

Posted on by
3

In a previous post I explained how to getting started with STM32 with classical Eclipse or Keil environments. These environments are very cool for starting from scratch in designing firmware. That said, you have to recreate a lot of basic functions and libraries to create your firmware.

On the other hand, the Arduino community is proposing a lot a existing libraries and a development framework with a large number of supported features. The STM32 community looks active and that’s a good way to quickly create advanced firmware.

That said there is different point blocking in my point of view for using Arduino as a professional environment:

  • Outside of the core libs and some nice one, most of the lib are badly written
  • The official editor is a mess if you manage more than 3 files…
  • Writing libraries with official editor is… “impossible”

For this reason, in this tuto, I’ll use Visual Code Studio  to see if the 2 last point can be solved. Regarding the first point, there is nothing better than using well coded libraries and rewrite (and share) the badly written one.

Continue reading →

Getting started with Arduino MKRWAN1300 & LoRaWan TTN

Posted on by
Reply

After making some post on Arduino MKRFOX1200, here I come with the first steps to use MKRWAN1300 board to send your first frame on TTN and also how to use them for discovering the TTN coverage around.

MKRWAN1300 board is a LoRaWan Arduino board based on the Murata CMWX1ZZABZ module. This module is capable for LoRaWan in Europe (868Mhz), NA (915MHz) Asia (923MHz) …. It is also capable for Sigfox in both zone (but actually not with this board as much as I know). Producing 14dB emission and capable for 20dB emission for FCC zone. The price of the Arduino board is about 40€ and it is largely available on Internet.

In this post we are going to see how to make the first steps with this board and create a device to map the TTN network coverage with and without a GPS.

Continue reading →