You may have read some of my post about RF433 and Raspberry PI. Basically with RPI 1, I was using wiringPi interrupt handler to manage the RF433 decoding. The problem is that with RPI2 and RPI B+ the delay to take an interrupt that was becomes unpredictable. And the timing constraints are not respected. As a consequence part of the messages are loss because for these delay.
One of the solution (the software one) is to be more efficient to proceed the interrupts and the way to do this is to compile a kernel driver for directly handling the interrupts. This is what this post is about. This comes to complete the RFRPI code and associated hardware. A complete source code and software for using it is on the rfrpi bitbucket repository.
Challenge of the coming days : write a kernel driver to manage interruption quicker on a raspberry pi 2. I’m happy to find a lot of example on Internet and in particular this one, that is really looking like what I’m trying to do. This post is describing all the step needed to do this.